01442 573 035
Internet of Things - IoT
Modular IoT Solution
Networking and Datacom
Power over Ethernet
Survey, UAV and Drones
Wireless Boards and Modules
Akros (A Kinetic Company)
Terms & Conditions
EMI - ESD ICs
Enables system designers to comply with:
CISPR22 and FCC Part 15, Class B requirements for Radiated and Conducted Emissions.
IEC 61000-4-3/6 requirements for Radiated and Conducted Immunity, Level 3 or higher.
IEC 61000-4-2 ESD (Air Discharge) of ±25kV.
IEC 61000-4-2 ESD (Contact Discharge) of ±12kV.
Cable Discharge Event (CDE) of ±12kV.
Provides up to 10dB of additional common mode noise suppression over the frequency of 1MHz to 125MHz when used with Ethernet magnetics.
Robust built-in ESD suppressors protect the Ethernet Phy and improve system ESD performance.
JESD22-A114, ESD, HBM of ±8kV.
Interfaces to standard Ethernet transformers and 10/100/
1000 Ethernet PHYs.
Uses a single standard power rail (3.3V or 2.5V).
Open drain output stage that can be biased from 1.8V to 3.3V using transformer center-tap supply as needed based on choice of Ethernet Phy.
Flow-through routing for ease of board layout.
Typical power consumption of 90mW.
Low power mode available for tight power budgets.
Industrial temperature range (-40°C to 85°C).
Ethernet systems requiring additional CM suppression to meet EMC Class B emissions or higher EMI immunity requirements and ESD protection.
POE and Non-POE Ethernet systems
VoIP Phones, IP Cameras, WAPs, Routers, Switches
Set Top Boxes, Networked Printers and Appliances,
Desktop and Laptop Computers
PDF (659.21 KB)